Posts Tagged Neff oven element
Neff oven not heating up
Posted by admin in Cooker Spares & Repairs News, Engineers Service Call Repair Diary on June 6th, 2009
Customer Service Call Request
Neff oven not heating
Engineers repair comments.
On inspection of the customers U1442 Neff oven i found that the Neff main oven fan motor was running at the correct speed but there was no heat from the element, i removed and checked the Neff oven spare parts by removing the screws that hold the internal oven back panel in place and then remove the panel itself, the Neff fan oven element can now be seem , then i remove the three screws holding the element in place, i gently pulled the Neff oven element towards the front of the oven so the wiring cables can be removed. I removed the cables and replaced the element with a genuine Neff oven spare part, i then reconnect the wires and fitted the new element then refitted the back panel and screws. Now it was time to test the Neff oven, it all worked fine. We normally fit genuine Neff oven spares and spare parts on all the repairs we carry out.
Neff Fan Oven Element
Posted by admin in Cooker Spares & Repairs News on May 13th, 2009
Customer Enquiry
My neff cooker does not get hot and there also appears to a covering of white powder in the oven compartment, do you stock any parts to fit neff ovens and is it likley to be the element, the model number i have is U1721W0GB/02
Reply
Yes we stock a large range of oven spares and elements, There is a good chance that the element has failed, the covering of white substance is from the inside the element metal covering which has insulation properties for the element coil inside this covering, Close inspection of the element should show damage to the external covering where the element has failed
Most neff oven fan elements can be changed from the front of the oven by removing the backplate inside the oven and the fixing screws holding the element which is fitted round the oven fan motor blade to rear box of the oven there will be leads attached to this element so be careful when removing so as to pull through these leads other wise it will mean removing the oven from the unit to be able to reconnect.